Rockwool Duct Wrap :

INCOM Rockwool Duct wrap is a low density flexible mattress faced with reinforced aluminum foil on one side.

Application :

Designed for thermal and acoustic insulation of various applications such as duct and cladding or other equipment in heating, ventilating and air conditioning applications.

Care should be taken during installation to see all laps and joints should be securely sealed to avoid vapor leaks. 

Services Temperature :

Has a service temperature of 750°C when tested in accordance with DIN 52271.

Fire Safety :

Non-combustible when tested in accordance with BS476: Part 4 :1970.

Standard Delivery :

Available in densities of 30 to 50 kg/m³ in standard widths of 1000 and 1200mm; and 5000 mm length. Thicknesses are available from 30 to 120 mm. Other lengths and width sizes are available upon request.

Facing :

Faced with reinforced aluminum foil.

Thermal Conductivity :

INCOM Rockwool products show remarkably low thermal conductivity values. Typical figures are shown below as tested in accordance with BS 874 : 1986.

Compatibility :

Compatible with all other forms of material with which it is likely to come in contact in normal industrial and building applications.

Biological Properties :

Rot - proof, non-hygroscopic, it will not sustain vermin and will not encourage growth of bacteria, mold or fungi.

Moisture :

Water repellent, non-hygroscopic, non - capillary it does not absorb any moisture from the air. Moisture has no effect on the stability of duct wrap. Water absorption test certificate (Partial Immersion) conducted under BS 2972 : Section 12 are available upon request.

Chemical Neutrality :

Chemically neutral with a pH value of 7.3 when tested accordance with BS 2972 : Section 22. It will neither cause nor promote corrosion. It meets the requirements of the standard specification for use over austenitic stainless steel as per ASTM C-692 (Corrosion test). and ASTM C - 871 (Chemical analysis).

It contain low levels of chloride at 6.5 PPM when tested in accordance with BS 2972 : Section 21.

Packaging :

Supplied in polyethylene bags.

Unit Price :

For details on price our sales office can be contacted.

Technical Advice :

For Further Details of information on technical data, Specialist product information, applications, heat loss calculation or economic thickness, our sales office can be approached.